Instructions

1) Enter the information into the input fields. You can use the lookup table below for reference, or follow sample values on the status line. All input fields are required.

2) Press the 'Calculate' button and view the results in the lower part of the form

3) Press the 'Submit' button to e-mail the information to the systems support. (Note: all the values will be re-validated and re-calculated before submission)

Field Type Range Example Validation against other fields
Current Band Width float ≥ 1.0 23.456 Has to be no greater than Final Width, otherwise no point to calculate, since variable width order rules don't apply
Min Width float ≥ 1.0 55.5887 Has to be no greater than Max Width
Max Width float ≥ 1.0 57.012 Has to be no less than Min Width
Final Width float ≥ 1.0 56.32 Has to be between Min Width and Max Width
Slit Width float ≥ 1.0 7.198 Has to be no greater than half of Final Width, otherwise the order is not coded correctly and is not a variable width order
Min Coils Pkg int ≥ 1 1 Has to be no greater than Max Coils Pkg
Max Coils Pkg int ≥ 1 6 Has to be no less than Min Coils Pkg
Min Band Weight int ≥ 1 12000 Has to be no greater than Max Band Weight
Max Band Weight int ≥ 1 24155 Has to be no less than Min Band Weight